Detail Tali H500
DESCRIPTION
This package is the FPV exclusive package that includes the Gimbal, iLook+ camera, Devo F12E FPV transmitter and the Hexcopter.
The Walkera Tali H500 revolutionized the multi-rotor market upon its release in 2014 by bringing GPS stabilized mutli-rotor flight to the R/C market. Walkera is breaking the rules again in 2014 with the release of the all new Tali H500, which boasts a whole host of new features and optimization for aerial video/FPV use.
The all new Walkera Tali H500 provides astonishing 25 minute flight times on the stock power system, features the all new FCS-H500 flight controller providing improved stability/GPS position holding and also is ""Plug and Play"" compatible with Walkera's G-3D brushless camera gimbal.
The new advanced Intelligent Orientiation Control can allow H500 start and fly in any orientaion , completely solving pilot "" loss of orientaion"" problems.
The Tali H500 has an enhanced altitude sensor which adopts GPS technology allowing it to work out its exact position in reference to the world, this allows the Tali H500 to hover in a stabilized position hold mode. With a simple one switch flip or loss of signal the Tali H500 will fly itself back to its take-off position and land! Additionally, it offers a manual mode for the sport flyer and even an onboard low voltage warning system to alert you when it’s time to land.
This version of the Tali H500 comes completely ready to fly including the high quality, fully programmable DEVO F12E transmitter, 22.2V 5400mAh LiPoly flight battery and balance charger. Also included is the all new G-3D brushless camera gimbal which is designed for use with Walkera's iLook+ HD FPV camera and also the GoPro Hero 3. The G-3D is pre-tuned from the factory requiring no setup, simply bolt on to the bottom of the Tali H500, install your iLook or GoPro Hero 3 camera and you're ready to shoot professional stabilized aerial video! The iLook+ Camera is included in this FPV version package too. So you can plug and enjoy full FPV flying experience!
SPECIFICATION
- Main Rotor Diameter: 233mm
- Length: 471mm
- Width: 536mm
- Height: 270mm
- Brushless Motor: WK-WS-34-001
- Brushless ESC: WST-15AH (R/G))
- Receiver: DEVO-RX7053
- Main Controller: FCS-H500
- Transmitter: DEVO F7
- Battery: 3S 11.1V 5200mAh Lipoly
- Flight Time: 25 minutes
- Brushless Gimbal Support: G-3D
- Gimbal Comatibility: iLook and GoPro Hero 3 (GoPro Camera NOT Included)
- Main Rotor Diameter: 233mm
- Length: 471mm
- Width: 536mm
- Height: 270mm
- Brushless Motor: WK-WS-34-001
- Brushless ESC: WST-15AH (R/G))
- Receiver: DEVO-RX7053
- Main Controller: FCS-H500
- Transmitter: DEVO F7
- Battery: 3S 11.1V 5200mAh Lipoly
- Flight Time: 25 minutes
- Brushless Gimbal Support: G-3D
- Gimbal Comatibility: iLook and GoPro Hero 3 (GoPro Camera NOT Included)
ITEM INCLUDED
- Walkera Tali H500 Multi Function Hexcopter x 1
- DEVO F12E Transmitter x 1
- Spare propellers x 1
- Tali H500 22.2V 5400mAh LiPoly battery x 1
- G-3D brushless camera gimbal x 1
- Walkera iLook+ HD Camera x 1
- Balance Charger x 1
- Walkera Tali H500 Multi Function Hexcopter x 1
- DEVO F12E Transmitter x 1
- Spare propellers x 1
- Tali H500 22.2V 5400mAh LiPoly battery x 1
- G-3D brushless camera gimbal x 1
- Walkera iLook+ HD Camera x 1
- Balance Charger x 1